fbpx

Browse CenturionTM Wood Coatings Products

CW-1111 High-Build Acrylic Modified Polyurethane Primer

The CW-1111 is a white acrylic modified polyurethane primer to be used on interior applications. It is designed for cabinets, furniture, and millwork. Being a 1K/2K primer allows this product to be applied with or without our CW-4002 hardener. When you add 5% hardener it will block stain bleeding and tannin migration. A 5 hour pot life gives you time to apply the ideal coats for that flawless finish.

  • Great for MDF, hard and soft woods
  • Can be universally topcoated
  • Will block tannins and dye with 5% hardener
  • Excellent 5 hour pot life
  • Industry leading chemical and moisture protection
  • Can be recoated without sanding within potlife
    Great sandability

CW-9004 Water-Based Medium Reducer

This water-based resin blend is used to reduce desired viscosity to allow Centurion™ primers and topcoats to be able to flow better through various equipment. Usage levels relative to water are approximately 2-3 times less, allowing for higher solids applications than with water alone.

Features/Advantages

  • Low VOC
  • Viscosity reduction
  • Slightly slower dry times

Recommended for

  • Centurion primers
  • Centurion topcoats

CW-9002 Water-Based Thickening Agent

When added, this water-based thickener provides increased viscosity resulting in better vertical hang. Designed for use with all Centurion™ water-based wood coatings, it can be added at a rate of 1tbs – 3tbs to all water-based products manufactured by Centurion™. Available in quarts.

Features/Advantages

  • Increased viscosity
  • Better hang time

Recommended for:

  • 2800 Series Topcoats
  • 1800 Series Topcoats
  • 1107 Primer
  • 1108 Primer
  • 400 Series Topcoats

CW-9001 Water-Based Retardant

This water-based resin blend is used to decrease dry time to allow Centurion™ primers and topcoats to be able to dry more slowly. Usage levels relative to water are approximately 3-4 times less.

  • Low VOC
  • Viscosity reduction
  • Slower dry times

Clear Polyurethane Floor Coating 2400 Series

This multi-purpose, premium, water-based, self-sealing, clear, floor coating may be used as both a sealer and a topcoat. Designed for durability and performance, it’s perfect for a variety of high-end architectural millwork and wood floor applications. It has outstanding colorfastness and offers excellent chemical and humidity resistance along with protection from UV degradation. In addition, the fully cured film guards against abrasion and black heal marks and brings a natural, warm look to the wood. It may be applied with conventional, airless, and air-assisted airless spraying equipment.

CW-6001 Spray/Wipe Stain Base

This universal, versatile, water-based stain base was designed for use with any combination of Centurion™ concentrated acid dyes and colorants for tinting applications. This stain base allows for a harmonized look over the wood substrate. It may be sprayed with conventional, airless, and air-assisted airless application equipment. It is also easily modified for wipe or dip applications.

CW-6002 Wiping Glaze Base

This universal, versatile, water-based wiping glaze base was designed for use with any combination of Centurion™ concentrated acid dyes and colorants for tinting applications. It allows for a harmonized look over the wood substrate and can be used as a glaze or stain. It may be sprayed with conventional, airless, and air-assisted airless application equipment. It is also easily modified for wipe or dip applications. It’s designed for maximum open time and usability.

Pre-Catalyzed Lacquer Topcoat

Protect your high-quality wood products with this premium, pre-catalyzed lacquer. This high-build top coat provides exceptional resistance to water, solvents, and household chemicals and resists yellowing. It may be sprayed with conventional, airless, and air-assisted airless application equipment. This product is available in Clear and White.

Available Products

  • CS-3041-G01 Clear Pre-Catalyzed (Flat)
  • CS-3042-G01 Clear Pre-Catalyzed (Satin)
  • CS-3043-G01 Clear Pre-Catalyzed (Semi-Gloss)
  • CS-3044-G01 Clear Pre-Catalyzed (Gloss)
  • CS-3141-G01 White Pre-Catalyzed (Flat)
  • CS-3142-G01 White Pre-Catalyzed (Satin)
  • CS-3143-G01 White Pre-Catalyzed (Semi-Gloss)
  • CS-3144-G01 White Pre-Catalyzed (Gloss)

 

CW-3020 Natural Look Polyurethane Topcoat

CW-3020 is a premium, 2-component, water-based, self-sealing polyurethane topcoat used as both a sealer and a topcoat. This unique coating offers excellent chemical and humidity resistance while providing a natural, unfinished look to the wood. The fully cured film provides superior resistance to abrasion and “polishing up.” Designed for durability and performance, this coating can be used for a variety of high-end architectural millwork or wood floor applications.

Nitrocellulose Lacquer Topcoat

These premium, water-clear and white, nitrocellulose topcoats were designed for use on high-end wood products. The volume solids and toughness provide a high-build, non-yellowing, mar-resistant coating. They may be applied with conventional, airless, and air-assisted airless spraying equipment.

Available Nitrocellulose Lacquer Topcoats

  • CS-3002 Clear Nitro Topcoat (Satin)
  • CS-3003 Clear Nitro Topcoat (Semi-Gloss)
  • CS-3102 White Nitro Topcoat (Satin)
  • CS-3103 White Nitro Topcoat (Semi-Gloss)
Clear Vinyl Sanding Sealer 550 VOC

CS-2006 Clear Vinyl Sanding Sealer

This high-performance, clear, vinyl-modified, nitrocellulose sanding sealer is designed for use under nitrocellulose lacquers, acrylic finishes and pre-catalyzed topcoats. This sealer serves as a barrier against moisture with excellent penetration and adhesion in a ready-to-spray viscosity.

 

CW-4002 Polyurethane Catalyst-Hardener

To get the ultimate performance from some of our primers and topcoats they need to be catalyzed. Our very own CW-4002 is an isocyanate hardener and the ultimate catalyst. It’s an integral part of our “European Quality, Made In America” foundation and designed, developed and manufactured in McKinney, Texas. You can now order CenturionTM CW-4002 Water Based Hardener right here and have it shipped to any location within the contiguous United States.

2K Polyurethane Topcoat 2800 Series

The Centurion™ 2k Polyurethane Topcoat 2800 Series is the most versatile water-based coating on the market. Made with aqueous, castor oil-based polyurethane, this multi-purpose, fast-drying, sandable coating provides excellent chemical and humidity resistance with outstanding colorfastness and protection from UV degradation. Used as a sealer or topcoat, the fully cured film affords superior resistance to abrasion and black heel marks while giving a natural, warm look to the wood. It’s designed for durability and performance on a variety of high-end architectural millwork, hardwood flooring, and cabinetry. The 2800 Series is available in Clear, White and Tint Base variations.

Available in Clear and White with Flat, Satin, Semi-Gloss and Gloss sheens
Also available in Clear and Deep Tint Bases in Flat and Satin sheens

CW-1107 2K White Acrylic Polyurethane Primer

This true two-component, white, acrylic polyurethane primer is designed to be used in interior applications where extreme chemical and moisture resistance are required. Unlike most competitive polyurethanes, this is not a polyurethane dispersion/modified acrylic topcoat.

 

 

CS-1106 White Vinyl Lacquer Undercoater

This compliant, premium, high-solids, white vinyl lacquer undercoater is a durable, vinyl primer that provides excellent build, excellent hide and rapid cure schedules. Use on wood substrates where excellent hiding, sanding ability and moisture resistance are needed.

 

CW-2001 High Build Clear Sanding Sealer

This 100% acrylic, non-yellowing, water-based, clear sanding sealer is durable and offers a high-build finish with excellent sandability and holdout.

1K Acrylic Topcoat 400 Series

This premium, water-based, durable, self-crosslinking, 1K acrylic topcoat exhibits excellent hardness and protection against chemicals and humidity. It’s mar and print resistant and offers ease of sanding. Its versatility makes it equally ideal for both sealer and finish applications. It does not require thinning and is ready to spray with conventional, airless, and air-assisted airless application equipment. Available in White, Clear and Tint Bases.

Available in Clear and White with Flat, Satin, Semi-Gloss and Gloss sheens
Also available in Clear and Deep Tint Bases in Flat and Satin sheens

CS-1106 White Vinyl Lacquer Undercoater Aerosol

This premium, high-solids, white vinyl lacquer undercoater/primer is a durable, vinyl primer that provides excellent build, excellent hide and rapid cure schedules. Use on wood substrates where excellent hiding, sanding ability and moisture resistance are needed.

Clear Polyurethane Floor Coating 2400 Series

Clear Polyurethane Floor Coating 2400 Series

Clear Polyurethane Floor Coating 2400 Series

Questions? We're here to help.

Fill in your details and we’ll get back to you in no time.

SUBSCRIBE

Centurion™ Wood Coatings- European Quality. American Made.

This website uses cookies to ensure you get the best experience on our website.

Call Now
Directions