fbpx

400 Series Application Systems

At Centurion™ we believe in proven stain application systems. They give you the most effective routes to the builds, finishes and dramatic effects you want to create. So on the back of our product sheets we include application systems to help you get to the look you want in record time using CenturionTM Wood Coatings.

Pigmented, Water Based Systems with 400 Series

For self-sealing system with new wood*
  1. Apply white 400 series 1k or with 2% crosslinker CW-4001 at 3-5 wet mils**

2. Apply white 400 series with 2% crosslinker CW-4001
Apply a minimum of 1-2 coats at 3-5 wet mils.**

For MDF, new wood or refinishing where no tannin or dye blocking is needed*
  1. Apply CW-1107 with 15% CW-4002 at 5-6 wet mils.
    Let dry at least 1 hr before sanding ***

2. Apply a minimum of 2 coats 400 series 1k or with 2% crosslinker CW-4001at 3-5 wet mils. **

For high build/grain filling on new wood or refinishing (resistant to tannin bleed & dye migration) *

  1. Apply CW-1107 with 15% CW-4002 at 5-6 wet mils.

        Let dry overnight/at least 8 hours***

        Let dry for at least an hour before sanding.

        Apply a minimum of 2-3 coats at 5-6 wet mils each.

2. Apply a minimum of 2 coats white 400 1k or with 2% crosslinker CW-4001 at 3-5 wet mils. **

Hybrid Water-Based/ Solvent-Based Finishing System

For new wood or refinishing*

  1. Apply 1-2 coats or CS-1106 275 VOC White Vinyl Primer or CS-1112 550 VOC White Vinyl Primer at 4-5 wet mils. **

2. Apply white series 1k or with 2% crosslinker CW-4001

Apply a minimum of 2 coats at 3-5 wet mils. **

Self-Sealing System*

  1. Apply clear 400 series 1k or with 2% crosslinker CW-4001 at 3-5 wet mils. **

2. Apply a minimum of 2 coats white 400 series 1k or with 2% crosslinker CW-4001 at 3-5 wet mils. **

Clear, Hybrid Systems with 1800 Series*

  1. Apply 1-2 coats of CS-2007 275 VOC Clear Vinyl Sealer or CS-2006 550 VOC Clear Vinyl Sealer at 3-4 wet mils. **

2.Apply a minimum of 2 coats clear 400 series 1k or with 2% crosslinker CW-4001 at 3-5 wet mils. **

*Make sure surface is clean and sanded to at least 220p grit or fine pad by surfprep; 320p between coats or very fine pad by surfprep

**Follow instructions on the TDS for additional information

***Pot-life is 3 hours at 15% catalyst ratio; with 10% catalyst pot life is 6 hours. After that, it will thicken and ruin equipment if not cleaned immediately

Questions? We're here to help.

Fill in your details and we’ll get back to you in no time.

SUBSCRIBE

Centurion™ Wood Coatings- European Quality. American Made.

This website uses cookies to ensure you get the best experience on our website.

Call Now
Directions