At Centurion™ we believe in proven stain application systems. They give you the most effective routes to the builds, finishes and dramatic effects you want to create. So on the back of our product sheets we include application systems to help you get to the look you want in record time using CenturionTM Wood Coatings.
For new wood or refinishing (resistant to tannin bleed & dye migration)
- Apply CW-1107 with 5% CW-4002 at 5-6 wet mils.
Let dry overnight/at least 8 hours.
2. Catalyze white 2800 series with 15% catalyst.
Apply a minimum of 2 coats at 3-5 wet mils.
For MDF, new wood or refinishing where no tannin or dye blocking is needed
- Apply CW-1107 with 15% CW-4002 at 5-6 wet mils.
Let dry for at least 1 hour before sanding.
2. Catalyze white 2800 series with 15% catalyst.
Apply a minimum of 2 coats at 3-5 wet mils.
For high build/grain filling on new wood or refinishing (resistant to tannin bleed & dye migration)
- Apply CW-1107 with 15% CW-4002 at 5-6 wet mils.
Let dry overnight/at least 8 hours
Let dry for at least an hour before sanding.
Apply a minimum of 2-3 coats at 5-6 wet mils each.
2. Catalyze white 2800 series with 15% catalyst.
For clear, use 2800 series 1k or 2k with 10-25%.
Apply a minimum of 2 coats at 3-5 wet mils.
For a self-sealing system using new wood or refinishing
- Apply the 2800 series 1k or 2k with 10-25% catalyst at 3-5 wet mils.
2. Catalyze the 2800 series 1k or 2k with 15% catalyst.
Apply 1-2 coats at 3-5 wet mils.
Hybrid Water-Based/Solvent-Based Finishing System
For high build/grain filling on new wood or refinishing (resistant to tannin bleed & dye migration)
- Apply 1-2 coats of CS-1112 550 VOC or CS-1106 275 VOC White Vinyl Primer at 4-5 wet mils.
2. Catalyse white 2800 series with 15% catalyst.
Apply a minimum of 2 coats at 3-5 wet mils.
Hybrid Water-Based/Solvent-Based Finishing System
- Apply 1-2 coats of CS-2007 275 VOC or CS-2006 550 VOC Clear Vinyl Sealer at 3-4 wet mils.
2. Catalyze white 2800 series 1k or 2k with 15% catalyst. Apply at a minimum of 2 coats at 3-5 wet mils.
Always follow Technical Data Sheet of each product. Pot life for 2800 series with 25% catalyst is 3 hours; with 10% catalyst pot life is 6 hours. After that, it will thicken, harden and ruin equipment if not cleaned immediately. Be sure to slowly pour catalyst into product while product is under agitation. Make sure all surfaces are clean and sanded to at least 220p grit or use “Fine” pad by Surfprep™ and 320p grit or use a “Very Fine” Surfprep™ pad between coats.
